DYNA MICRO, INC. MBA-386A-33/64 Processor 80386DX Processor Speed 33MHz Chip Set Addonics Max. Onboard DRAM 8MB Cache 64KB BIOS Award Dimensions 332mm x 218mm I/O Options 32-bit external memory card slot NPU Options 80387/3167 [Image] CONNECTIONS Purpose Location Purpose Location External battery CON1 Turbo switch CON5 Speaker CON2 Reset switch CON6 Power LED & CON3 32-bit external S1 keylock memory card Turbo LED CON4 USER CONFIGURABLE SETTINGS Function Jumper Position » Battery select external JP1 pins 1 & 2 closed Battery select internal JP1 pins 2 & 3 closed Battery select none JP1 Open » Monitor type select monochrome JP2 pins 1 & 2 closed Monitor type select color JP2 pins 2 & 3 closed » Power good signal detect from JP3 pins 2 & 3 power supply closed Power good signal detect from JP3 pins 1 & 2 board closed » Factory configured - do not alter JP4 N/A Note: This board does not come standard with an internal battery. DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 1MB (4) 256K x 9 NONE NONE NONE 2MB (4) 256K x 9 (4) 256K x 9 NONE NONE 4MB (4) 1M x 9 NONE NONE NONE 5MB (4) 256K x 9 (4) 1M x 9 NONE NONE 8MB (4) 1M x 9 (4) 1M x 9 NONE NONE 12MB (4) 1M x 9 (4) 1M x 9 (4) 1M x 9 NONE 16MB (4) 1M x 9 (4) 1M x 9 (4) 1M x 9 (4) 1M x 9 Note Banks 2 & 3 are used when a 32-bit external memory card is installed at S1. CACHE CONFIGURATION Size Bank 0 TAG 64KB (8) 8K x 8 (2) 16K x 1 Note: The location of the TAG is unidentified. This board comes standard with 64KB cache and is not alterable.