CORDATA TECHNOLOGIES

CPC-8200

Processor               80386SX
Processor Speed         16MHz
Chip Set                Unidentified
Max. Onboard DRAM       8MB
Cache                   None
BIOS                    Unidentified
Dimensions              350mm x 304mm
I/O Options             Serial ports (2), parallel port, floppy drive
                        interface, IDE interface, analog video port,
                        digital video port
NPU Options             80387SX

[Image]

                                CONNECTIONS

  Purpose                  Location   Purpose                    Location

  Parallel port              J1       Floppy drive interface       J10

  Serial port 1              J2       IDE interface                J11

  Serial port 2              J3       Video feature                J15

  Analog video port          J4       Riser card                   R1

  Reset switch               J6       Speaker                      W1

  Digital video port         J7       IDE interface LED            W12

  External battery           J8       Turbo switch                 W13

                        USER CONFIGURABLE SETTINGS

               Function                   Jumper/Switch       Position

  »   Floppy drive interface enabled          SW1/1              On

      Floppy drive interface disabled         SW1/1              Off

  »   Monitor type select color               SW1/2              On

      Monitor type select monochrome          SW1/2              Off

  »   Factory configured - do not             SW1/3              N/A
      alter

  »   Factory configured - do not             SW1/4              N/A
      alter

  »   Factory configured - do not             SW1/5              N/A
      alter

  »   Factory configured - do not             SW1/6              N/A
      alter

  »   IDE interface enabled                   SW1/7              On

      IDE interface disabled                  SW1/7              Off

  »   Password enabled                        SW1/8              On

      Password disabled                       SW1/8              Off

  »   Monitor type select PS/2 fixed          SW2/1              Off
      frequency

      Monitor type select                     SW2/1              On
      multi-frequency

  »   Video mode select PS/2 - all            SW2/2              Off
      VGA modes

      Video mode select PC/AT -               SW2/2              On
      color/mono modes

  »   Vertical retrace interrupt              SW2/3              Off
      disabled (IRQ2)

      Vertical retrace interrupt              SW2/3              On
      enabled (IRQ2)

  »   Video mode select VGA                   SW2/4              Off

      Video mode select EGA 350 line          SW2/4              On

  »   Analog video port (J4) enabled          SW2/5              Off

      Analog video port (J4) disabled         SW2/5              On

  »   VGA logic enabled                       SW2/6              Off

      VGA logic disabled                      SW2/6              On

  »   Factory configured - do not             SW1/7              N/A
      alter

  »   Video logic enabled                     SW2/8              Off

      Video logic disabled                    SW2/8              On

  »   NPU CKM mode select synchronous          W3               Open

      NPU CKM mode select                      W3              Closed
      asynchronous

  »   Floppy drive precompensation             W6             pins 1 & 2
      time select 125ns                                        closed

      Floppy drive precompensation             W6             pins 2 & 3
      time select 187ns                                        closed

  »   IDE interface host RESET select          W7             pins 2 & 3
      Conner CP3044                                            closed

      IDE interface host RESET select          W7             pins 1 & 2
      WD93044 Miniscribe 8051A                                 closed

  »   IDE interface host IOCHRDY               W8               Open
      select Conner CP3044 WD93044

      IDE interface host IOCHRDY               W8              Closed
      select Miniscribe 8051A

  »   IDE interface host ALE select            W9               Open
      WD93044-AXX-XX

      IDE interface host ALE select            W9              Closed
      Conner CP3044 Miniscribe 8051A

  »   Pipeline mode enabled                    W10             Closed

      Pipeline mode disabled                   W10              Open

  »   EMS mapper disabled                      W11              Open

      EMS mapper enabled                       W11             Closed

  »   Parity check enabled                     W20             Closed

      Parity check disabled                    W20              Open

                            DRAM CONFIGURATION

    Size          Bank 0         Bank 1         Bank 2          Bank 3

    512KB      (2) 256K x 9       NONE           NONE            NONE

    640KB      (2) 256K x 9    (2) 64K x 9       NONE            NONE

     1MB       (2) 256K x 9    (2) 256K x 9      NONE            NONE

   1.128MB     (2) 256K x 9    (2) 64K x 9    (2) 256K x 9       NONE

    1.5MB      (2) 256K x 9    (2) 256K x 9   (2) 256K x 9       NONE

   1.64MB      (2) 256K x 9    (2) 64K x 9    (2) 256K x 9   (2) 256K x 9

     2MB       (2) 256K x 9    (2) 256K x 9   (2) 256K x 9   (2) 256K x 9

     2MB        (2) 1M x 9        NONE           NONE            NONE

   2.64MB      (2) 256K x 9    (2) 64K x 9    (2) 1M x 9         NONE

     3MB       (2) 256K x 9    (2) 256K x 9   (2) 1M x 9         NONE

     4MB        (2) 1M x 9     (2) 1M x 9        NONE            NONE

   4.64MB      (2) 256K x 9    (2) 64K x 9    (2) 1M x 9      (2) 1M x 9

     5MB       (2) 256K x 9    (2) 256K x 9   (2) 1M x 9      (2) 1M x 9

     6MB        (2) 1M x 9     (2) 1M x 9     (2) 1M x 9         NONE

     8MB        (2) 1M x 9     (2) 1M x 9     (2) 1M x 9      (2) 1M x 9