MNC INTERNATIONAL, INC.

MNC 1132 COMPLETE 286-16 (Rev. 4.0)

Processor               80286
Processor Speed         12/16MHz
Chip Set                Headland
Max. Onboard DRAM       4MB
Cache                   None
BIOS                    Quadtel
Dimensions              330mm x 106mm
I/O Options             EGA port, floppy drive interface, IDE interface,
                        parallel port, serial ports (2), VGA port
NPU Options             80287

[Image]

                                CONNECTIONS

  Purpose                   Location   Purpose                   Location

  Turbo LED                   J3       Front panel switches        P4

  IDE interface LED           J8       Serial port 1               P5

  Parallel port               P1       Serial port 2               P6

  VGA port                    P2       Floppy drive interface      P7

  EGA port                    P3       IDE interface               P8

                        USER CONFIGURABLE SETTINGS

                 Function                     Jumper         Position

  »   VGA interrupt select none                 J1           pins 1 & 2
                                                              closed

      VGA interrupt select IRQ9                 J1           pins 2 & 3
                                                              closed

  »   Floppy drive controller select DMA9       J2            closed

      Floppy drive controller select no         J2             open
      DMA

  »   Monitor type select color                 J4            closed

      Monitor type select monochrome            J4             open

  »   Paralell port select                      J5           pins 2 & 3
      Uni-directional                                         closed

      Paralell port select Bi-directional       J5           pins 1 & 2
                                                              closed

  »   Power good signal detect from power       J6             open
      supply

      Power good signal detect from board       J6            closed

      VGA clock select 12MHz CPU                J7             open

      VGA clock select 16MHz CPU                J7            closed

  »   IDE interface enabled                     J9           pins 2 & 3
                                                              closed

      IDE interface disabled                    J9           pins 1 & 2
                                                              closed

      CPU clock speed select 12MHz              J10            open

      CPU clock speed select 16MHz              J10           closed

              DRAM CONFIGURATION

      Size          Bank 0          Bank 1

      1MB         (2) 256K x 9   (2) 256K x 9

      2MB         (2) 1M x 9         NONE

      4MB         (2) 1M x 9      (2) 1M x 9

[Image]

                                CONNECTIONS

  Purpose              Location     Purpose                    Location

  Power LED &            PKL        Keyboard/reset                KRS
  keylock                           switch/speaker

  Reset switch           RSW        CPU card slot                SCPU

  Speaker                SPK