QUALOGY, INC. QPC-5132 Processor 80286 Processor Speed 8/10/12.5/16MHz Chip Set G2 Max. Onboard DRAM 4MB SRAM Cache NONE BIOS AMI Dimensions 330mm x 120mm I/O Options Parallel port, serial ports (2-RS232, 1-RS422) NPU Options 80287 [Image] CONNECTIONS Purpose Location Purpose Location Reset switch J1 Serial port B (RS422) J6 Speaker J3 Serial port B (RS232) J7 Keylock J4 Serial port A (RS232) J10 Keyboard J5 Parallel port J15 USER CONFIGURABLE SETTINGS Function Jumper/Switch » Monitor type select color J9 Open Monitor type select J9 Closed monochrome » Parallel port enabled J12 Closed Parallel port disabled J12 Open » BIOS type select 27256 J24 pins 1 & 2 closed BIOS type select 27512 J24 pins 2 & 3 closed » RS232 12V from backplane J99 pins 2 & 3 closed RS232 12V from card J99 pins 1 & 2 closed » Bus speed select slow SW1/switch 2 Off Bus speed select fast SW1/switch 2 On » CPU speed select OSC3 SW1/switch 5 Off CPU speed select OSC3 SW1/switch 5 On DRAM CONFIGURATION Size Bank 0 Bank 1 SW1/switch 1 SW1/switch 3 SW1/switch 4 512KB (2) NONE On On Off 256K x 9 1MB (2) (2) Off On Off 256K x 256K x 9 9 2MB (2) 1M NONE Off Off On x 9 4MB (2) 1M (2) 1M Off Off Off x 9 x 9 SERIAL PORT CONFIGURATION RS422 RS232 RS232 J8 J11 J13 J14 J18 J19 (J6) (J7) (J10) Disabled COM2 COM1 Closed Closed Closed Closed pins pins 1&2 1&2 COM2 Disabled COM1 Open Closed Closed Closed pins pins 1&2 1&2 Disabled COM1 COM2 Closed Closed Closed Open pins pins 2&3 2&3 COM1 Disabled COM2 Open Closed Closed Open pins pins 2&3 2&3 Disabled Disabled Disabled N/A Open Open N/A N/A N/A Note:Serial port B is configurable as either a RS422 port using J6 or a RS232 port using J7, but both connectors (J6 & J7) cannot be active at the same time. Pins designated should be in the closed position. MEMORY WAIT STATES CONFIGURATION Wait state CPU Speed J16 J17 J20 J21 0 wait states £ pins 1 & pins 1 & pins 1 & pins 1 & 2 2 2 2 1 wait state £ pins 2 & pins 2 & pins 2 & pins 2 & 3 3 3 3 1 wait state 16MHz pins 2 & pins 1 & pins 2 & pins 2 & 3 2 3 3 Note: Pins designated should be in the closed position