PACKARD BELL PB100 Processor 80286 Processor Speed 16MHz Chip Set TI Max. onboard DRAM 3MB SRAM Cache None BIOS Phoenix Dimensions 240mm x 240mm I/O Options Fax/modem daughterboard, floppy drive interface, game port, IDE interface, parallel port, PS/2 keyboard port, PS/2 mouse port, serial port, VGA port NPU Options 80287 [Image] CONNECTIONS Purpose Location Purpose Location External battery JBT Parallel port JLPT Serial port JCOM2 Proprietary modem JMOD daughterboard Floppy drive JFDD PS/2 keyboard JPKB interface Game port JGAM PS/2 mouse JPMS IDE interface JHDD VGA port JVGA IDE interface LED JHDI Riser card S1 Front panel JIND connector USER CONFIGURABLE SETTINGS Function Jumper/Switch Position » Onboard game port enabled JGAMS pins 1 & 2 closed Onboard game port disabled JGAMS pins 2 & 3 closed » Monitor type select color JVD Closed Monitor type select JVD Open monochrome » PS/2 mouse port enabled JMRQ Closed (IRQ12) PS/2 mouse port disabled JMRQ Open » Onboard IDE interface enabled JHDC pins 1 & 2 closed Onboard IDE interface JHDC pins 2 & 3 disabled closed » Onboard floppy drive JFDC pins 1 & 2 interface enabled closed Onboard floppy drive JFDC pins 2 & 3 interface disabled closed SERIAL PORT CONFIGURATION Modem Port B ISA Modem JC13 JC24 JMODJ (JMOD) (JCOM2) Disabled COM2 None N/A pins 1 Closed & 2 Disabled COM2 COM1 pins 2 pins 1 Closed & 3 & 2 Disabled COM2 COM3 pins 1 pins 1 Closed & 2 & 2 COM1 COM2 None pins 1 pins 1 Open & 2 & 2 COM3 COM2 None pins 2 pins 1 Open & 3 & 2 Disabled COM4 None N/A pins 2 Closed & 3 Disabled COM4 COM1 pins 2 pins 2 Closed & 3 & 3 Disabled COM4 COM3 pins 1 pins 2 Closed & 2 & 3 COM1 COM4 None pins 1 pins 2 Open & 2 & 3 COM3 COM4 None pins 2 pins 2 Open & 3 & 3 Note:* JMODJ is a special block placed on JMOD itself, connecting pins 10 and 11 together diagonally. Permanent damage to the board will occur if the JMODJ jumper is installed improperly. Pins designated should be in the closed position. PARALLEL PORT CONFIGURATION LPT IRQ JLPS JLRQ » LPT1 IRQ7 pins 1 & 2 pins 1 & 2 closed closed LPT1 IRQ5 pins 1 & 2 pins 2 & 3 closed closed LPT2 IRQ7 pins 2 & 3 pins 1 & 2 closed closed LPT2 IRQ5 pins 2 & 3 pins 2 & 3 closed closed VIDEO CONFIGURATION Mode IRQ JVGAS JVRQ » Enabled IRQ9 pins 1 & 2 Closed closed Enabled None pins 1 & 2 Open closed Disabled N/A pins 2 & 3 N/A closed DRAM CONFIGURATION Size Bank 0 Bank 1 1MB (8) 44256 NONE 3MB (8) 44256 (2) 1M x 9 Note: 256K x 9 SIMMs are not supported. Bank 0 is soldered to the board and should not be altered.