DYNA MICRO, INC. DYNA CACHE 386 Processor 80386DX Processor Speed 25/33MHz Chip Set C & T Max. onboard DRAM 8MB SRAM Cache 64KB BIOS AMI Dimensions 355mm x 304mm I/O Options 32-bit external memory card NPU Options 80387/3167 [Image] CONNECTIONS Purpose Location Purpose Location Turbo LED J1 Power LED & keylock J8 Reset switch J2 External battery J9 Speaker J7 32-bit external memory S1 card USER CONFIGURABLE SETTINGS Function jumper/Switch Position » BIOS select 27256 J4 pins 2 & 3 closed BIOS select 27128 J4 pins 1 & 2 closed » NPU enabled J5 pins 1 & 2 closed NPU disabled J5 pins 2 & 3 closed » Factory configured - do not J26 pins 2 & 3 alter closed » Factory configured - do not J28 pins 1 & 2 alter closed » Factory configured - do not SW1 Off alter » Monitor type select color SW2 On Monitor type select SW2 Off monochrome DRAM CONFIGURATION Size Bank 1(DIPP) Bank 2(SIMM) J27 1MB (36) 41256 NONE pins 1 & 2 and 3 & 4 closed 1MB NONE (4) 256K x 9 pins 2 & 3 and 4 & 5 closed 2MB (36) 41256 (4) 256K x 9 pins 1 & 2 and 3 & 4 closed 4MB (36) 411000 NONE pins 1 & 2 and 3 & 4 closed 4MB NONE (4) 1M x 9 pins 2 & 3 and 4 & 5 closed 5MB (36) 41256 (4) 1M x 9 pins 1 & 2 and 3 & 4 closed 5MB (36) 411000 (4) 256K x 9 pins 2 & 3 and 4 & 5 closed 8MB (36) 411000 (4) 1M x 9 pins 2 & 3 and 4 & 5 closed [Image] DIPP CONFIGURATION [Image] DRAM CONFIGURATION - 32-BIT MEMORY CARD System Memory Bank 2 Bank 3 SW1/1 SW1/2 SW1/3 DRAM Card DRAM 1M 4M (36) NONE Off On On 411000 1M 8M (36) (36) On On On 411000 411000 2M 4M (36) NONE Off Off On 411000 2M 8M (36) (36) On Off On 411000 411000 4M 4M (36) NONE Off On On 411000 4M 8M (36) (36) On On On 411000 411000 5M 4M (36) NONE Off On Off 411000 5M 8M (36) (36) On On Off 411000 411000 8M 4M (36) NONE Off Off On 411000 8M 8M (36) (36) On Off Off 411000 411000 Note:If less than 4MB are installed on the main board, a PAL on the memory card will need to be changed by the manufacturer.