ACER, INC. ACER 710 Processor 8088 Processor Speed 4.77/10MHz Chip Set None Max. onboard DRAM 1MB SRAM Cache None BIOS Phoenix Dimensions 325mm x 308mm I/O Options Floppy drive interface, parallel port, serial port, video NPU Options 8087 [Image] CONNECTIONS Purpose Location Purpose Location Floppy drive interface CN1 Video port J6 Keyboard connector J1 Parallel port J7 Front panel connector J2 Serial port J8 Note:The exact location of J1 and J2 is unknown. The location of CN1 is unknown. USER CONFIGURABLE SETTINGS Function Jumper/Switch Position » Video controller enabled JP1 pins 2 & 3 closed Video controller JP1 pins 1 & 2 closed disabled » COM1 enabled SW1/switch 1 On COM1 disabled SW1/switch 1 Off » Real time clock enabled SW1/switch 3 Off Real time clock disabled SW1/switch 3 On » Floppy drive interface SW2/switch 1 Off enabled Floppy drive interface SW2/switch 1 On disabled » NPU enabled SW2/switch 2 Off NPU disabled SW2/switch 2 On » Factory configured - do SW2/switch 5 N/A not alter » Onboard display enabled SW2/switch 6 Off Onboard display disabled SW2/switch 6 On » CPU speed high SW3/switch 8 On CPU speed low SW3/switch 8 Off » Monitor type select SW4 position 1 color Monitor type select SW4 position 2 monochrome Note: Disabling onboard video might also disable onboard parallel port. DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 256KB (9) 41256 NONE NONE 512KB (9) 41256 (9) 41256 NONE 640KB (9) 41256 (9) 41256 (9) 4164 768KB (9) 41256 (9) 41256 (9) 41256 DRAM JUMPER CONFIGURATION Size SW2/3 SW2/4 SW3/5 SW3/6 256KB Off Off Off Off 512KB On Off Off Off 640KB Off On Off Off 768KB Off On Off On FLOPPY DRIVE CONFIGURATION Drives SW2/switch 1 SW2/switch 7 SW2/switch 8 installed 0 On Off Off 1 Off On On 2 Off Off On