NEC TECHNOLOGIES, INC. POWERMATE EISA SERIES 386/33E Processor 80386DX Processor Speed 33MHz Chip Set Intel Max. onboard DRAM 16MB (On system memory card) Cache None BIOS Phoenix Dimensions 330.2mm x 218.4mm I/O Options Floppy drive interface, keyboard/bus mouse interface proprietary serial/parallel card, system memory card slot NPU Options 80387DX/3167 [Image] CONNECTIONS Purpose Location Purpose Location Speaker P1 Proprietary P10 serial/parallel card Keyboard/Bus mouse P2 System memory card S1 interface slot Power LED & Turbo P6 Test mode switch SW2 LED Floppy drive P7 interface Note:The test mode switch is set on Off at the factory and should not be altered. USER CONFIGURABLE SETTINGS Function Jumper/Switch Position » FDD transfer rate 3E1 pins 1 & 2 500/250/300 KB per second closed FDD transfer rate 500/250 KB 3E1 pins 2 & 3 per second closed » Factory configured - do not 9M1 Open alter » Factory configured - do not 10B1 pins 1 & 2 alter closed » Password enabled 10H1 pins 1 & 2 closed Password disabled 10H1 pins 2 & 3 closed » Factory configured - do not 12C2 Closed alter » Pipeline mode disabled 12C3 Open Pipeline mode enabled 12C3 Closed » RAS0 time-out timer enabled 13G1 pins 1 & 2 closed RAS0 time-out timer disabled 13G1 pins 2 & 3 closed » 32-bit data transmit enabled 16C1 Closed 32-bit data transmit 16C1 Open disabled » Factory configured - do not 16C2 pins 2 & 3 alter closed » Factory configured - do not 16C3 pins 2 & 3 alter closed » Factory configured - do not 16C4 pins 2 & 3 alter closed » Factory configured - do not 16F1 Closed alter » Parallel port enabled SW1/switch 1 On Parallel port disabled SW1/switch 1 Off » Floppy drive interface SW1/switch 4 On enabled Floppy drive interface SW1/switch 4 Off disabled » Floppy drive interface SW1/switch 5 On address select secondary Floppy drive interface SW1/switch 5 Off address select primary » NPU enabled SW1/switch 6 On NPU disabled SW1/switch 6 Off » Base memory size select SW1/switch 7 On 512KB Base memory size select SW1/switch 7 Off 640KB » IRQ12 designated to bus SW1/switch 8 On mouse IRQ12 designated to other SW1/switch 8 Off function » Monitor type select color SW1/switch 9 On Monitor type select SW1/switch 9 Off monochrome » Factory configured - do not SW1/switch 10 On alter Note:Parallel port is located on the proprietary serial/parallel card. SERIAL PORT CONFIGURATION COM1 COM2 SW1/switch 2 SW1/switch 3 COM1 COM2 On On COM1 Disabled On Off Disabled COM2 Off On Disabled Disabled Off Off Note:Serial port is located on the proprietary serial/parallel card. DRAM CONFIGURATION Size Bank Bank Bank Bank Bank Bank Bank Bank 7 0 1 2 3 4 5 6 2MB 2MB NONE NONE NONE NONE NONE NONE NONE 4MB 2MB 2MB NONE NONE NONE NONE NONE NONE 6MB 2MB 2MB 2MB NONE NONE NONE NONE NONE 8MB 2MB 2MB 2MB 2MB NONE NONE NONE NONE 10MB 2MB 2MB 2MB 2MB 2MB NONE NONE NONE 12MB 2MB 2MB 2MB 2MB 2MB 2MB NONE NONE 14MB 2MB 2MB 2MB 2MB 2MB 2MB 2MB NONE 16MB 2MB 2MB 2MB 2MB 2MB 2MB 2MB 2MB Note:.Banks are filled with proprietary 2MB memory modules (NEC part# 13-260131-502-A). System memory card is installed at J8.