FIRST INTERNATIONAL COMPUTER, INC.

PM-1000

Processor         Pentium
Processor Speed   60/66MHz
Chip Set          Intel
Max. Onboard DRAM 192MB
Cache             256KB
BIOS              Award
Dimensions        330mm x 218mm
I/O Options       32-bit PCI local bus slots (3)
NPU Options       None

[Image]

                                CONNECTIONS

  Purpose                  Location     Purpose                 Location

  Reset switch                J11       32-bit PCI Local bus      PCI1
                                        slot

  Speaker                     J12       32-bit PCI Local bus      PCI2
                                        slot

  Power LED & keylock         J13       32-bit PCI Local bus      PCI3
                                        slot

                        USER CONFIGURABLE SETTINGS

                Function                      Jumper         Position

  »   RTC reset (DS12887A only)                 J1             Open
      disabled

      RTC reset (DS12887A only) enabled         J1            Closed

  »   Flash EPROM disabled                      J2             Open

      Flash EPROM enabled                       J2            Closed

  »   Internal write-back cache enabled         J3             Open

      Internal write-through cache              J3            Closed
      enabled

  »   External parity check enabled             J4         pins 1 & 3 and
                                                               2 & 4

      External parity check disabled            J4         pins 1 & 2 and
                                                               3 & 4

  »   A31 set low                               J5           pins 1 & 2
                                                              closed

      A31 pulled high                           J5           pins 2 & 3
                                                              closed

  »   A30 set low                               J6           pins 1 & 2
                                                              closed

      A30 pulled high                           J6           pins 2 & 3
                                                              closed

      Software RTC clear supporting AMI         J7           pins 2 & 3
      BIOS                                                    closed

      Software RTC clear supporting             J7           pins 1 & 2
      Award BIOS                                              closed

  »   Internal parity check disabled            J8             Open

      Internal parity check enabled             J8            Closed

  »   Factory configured - do not alter        J14             Open

  Note:Pins designated should be in the closed position. The location of
  J8 is unidentified.

                      DRAM CONFIGURATION

      Size          Bank 0          Bank 1          Bank 3

      2MB         (2) 1M x 36        NONE            NONE

      4MB         (2) 1M x 36     (2) 1M x 36        NONE

      6MB         (2) 1M x 36     (2) 1M x 36    (2) 1M x 36

      8MB         (2) 4M x 36        NONE            NONE

      10MB        (2) 4M x 36     (2) 1M x 36        NONE

      12MB        (2) 4M x 36     (2) 1M x 36    (2) 1M x 36

      16MB        (2) 4M x 36     (2) 4M x 36        NONE

      18MB        (2) 4M x 36     (2) 4M x 36    (2) 1M x 36

      24MB        (2) 4M x 36     (2) 4M x 36    (2) 4M x 36

      32MB       (2) 16M x 36        NONE            NONE

      34MB       (2) 16M x 36     (2) 1M x 36        NONE

      36MB       (2) 16M x 36     (2) 1M x 36    (2) 1M x 36

      40MB       (2) 16M x 36     (2) 4M x 36        NONE

      42MB       (2) 16M x 36     (2) 4M x 36    (2) 1M x 36

      48MB       (2) 16M x 36     (2) 4M x 36    (2) 4M x 36

      64MB       (2) 16M x 36    (2) 16M x 36        NONE

      64MB       (2) 32M x 36        NONE            NONE

      66MB       (2) 16M x 36    (2) 16M x 36    (2) 1M x 36

      66MB       (2) 32M x 36     (2) 1M x 36        NONE

      68MB       (2) 32M x 36     (2) 1M x 36    (2) 1M x 36

      72MB       (2) 16M x 36    (2) 16M x 36    (2) 4M x 36

      72MB       (2) 32M x 36     (2) 4M x 36        NONE

      74MB       (2) 32M x 36     (2) 4M x 36    (2) 1M x 36

      80MB       (2) 32M x 36     (2) 4M x 36    (2) 4M x 36

                  DRAM CONFIGURATION (CONT.)

      Size          Bank 0          Bank 1          Bank 3

      96MB       (2) 16M x 36    (2) 16M x 36    (2) 16M x 36

      96MB       (2) 32M x 36    (2) 16M x 36        NONE

      98MB       (2) 32M x 36    (2) 16M x 36    (2) 1M x 36

     104MB       (2) 32M x 36    (2) 16M x 36    (2) 4M x 36

     128MB       (2) 32M x 36    (2) 16M x 36    (2) 16M x 36

     128MB       (2) 32M x 36    (2) 32M x 36        NONE

     130MB       (2) 32M x 36    (2) 32M x 36    (2) 1M x 36

     136MB       (2) 32M x 36    (2) 32M x 36    (2) 4M x 36

     160MB       (2) 32M x 36    (2) 32M x 36    (2) 16M x 36

     192MB       (2) 32M x 36    (2) 32M x 36    (2) 32M x 36

                           PCI IRQ CONFIGURATION

                 IRQ                                  JR1

  »                 9                          pins 3 & 4 closed

                    5                          pins 1 & 2 closed

                    11                         pins 5 & 6 closed

                    12                         pins 7 & 8 closed

                    STANDARD/BURST ANSY SRAM SELECTION

       SRAM             JC1           JC2           JC3           JC4

  »     Standard     pins 1 & 2    pins 1 & 2    pins 1 & 2    pins 1 & 2
                       closed        closed       closed        closed

       Burst Ansy    pins 2 & 3    pins 2 & 3    pins 2 & 3    pins 2 & 3
                       closed        closed       closed        closed

                            TECHNICAL NOTE

  To change between 60MHz and 66MHz, replace the Oscillator in OSC.