DELL COMPUTER CORPORATION

POWEREDGE SP 5XX/POWEREDGE XE 5XX/OMNIPLEX 5XX-ME

Processor              Pentium
Processor Speed        60/66MHz
Chip Set               Intel
Max. Onboard DRAM      192MB
Cache                  256KB
BIOS                   Intel
Dimensions             330mm x 218mm
I/O Options            32-bit riser card, floppy drive interface, IDE
                       interface, parallel port,

                       PS/2 mouse port, SCSI connector, serial ports (2),
                       VGA port
NPU Options            None

[Image]

                                CONNECTIONS

  Purpose                   Location   Purpose                   Location

  VGA port                    CN1      Floppy drive interface      CN8

  Parallel port               CN2      External battery            CN9

  Serial port 1               CN3      Speaker                    CN10

  Serial port 2               CN4      Chassis fan power          CN11

  PS/2 mouse port             CN5      Front panal connector      CN13

  Feature connector           CN6      IDE interface LED          CN16

  IDE interface               CN7      32-bit riser card slot      S1

                        USER CONFIGURABLE SETTINGS

              Function                   Jumper/Switch        Position

  »   Factory configured - do not            J15A               Open
      alter

  »   EISA configuration utility             J15B               Open
      settings normal operation

      EISA configuration utility             J15B              Closed
      settings clear

  »   Factory configured - do not            J15C               Open
      alter

  »   Factory configured - do not            J15D               Open
      alter

  »   Factory configured - do not             JP1              Closed
      alter

  »   Integrated SCSI host adapter           SCSI              Closed
      disabled

      Integrated SCSI host adapter           SCSI               Open
      enabled

  »   Factory configured - do not             SMI              Closed
      alter

  »   Monitor type built in VGA              SW1/1               On
      enabled

      Monitor type built in VGA              SW1/1              Off
      disabled

  »   System password enabled                SW1/2               On

      System password disabled               SW1/2              Off

  »   I/O controller uses addresses          SW1/3               On
      26Eh to 26Fh

      I/O controller uses addresses          SW1/3              Off
      398h to 399h

  »   Flash BIOS update enabled              SW1/4               On

      Flash BIOS update disabled             SW1/4              Off

                    DRAM CONFIGURATION

     Size          Bank 0         Bank 1        Bank 2

      8MB       (2) 1M x 36        NONE          NONE

     16MB       (2) 1M x 36    (2) 1M x 36       NONE

     24MB       (2) 1M x 36    (2) 1M x 36    (2) 1M x 36

     32MB       (2) 4M x 36        NONE          NONE

     40MB       (2) 4M x 36    (2) 1M x 36       NONE

     48MB       (2) 4M x 36    (2) 1M x 36    (2) 1M x 36

     64MB       (2) 4M x 36    (2) 4M x 36       NONE

                  DRAM CONFIGURATION (CONT.)

      Size          Bank 0          Bank 1          Bank 2

      72MB        (2) 4M x 36     (2) 4M x 36    (2) 1M x 36

      96MB        (2) 4M x 36     (2) 4M x 36    (2) 4M x 36

     128MB       (2) 16M x 36        NONE            NONE

     136MB       (2) 16M x 36     (2) 1M x 36        NONE

     144MB       (2) 16M x 36     (2) 1M x 36    (2) 1M x 36

     160MB       (2) 16M x 36     (2) 4M x 36        NONE

     192MB       (2) 16M x 36     (2) 4M x 36    (2) 4M x 36

   CPU SPEED CONFIGURATION

  Speed     J15F      J15E

  60MHz     Closed    Open

  66MHz     Open     Closed

      VIDEO MEMORY CONFIGURATION

    Size        Bank 0      Bank 1

     1M        (4) 44256     NONE

     2M        (4) 44256   (4) 44256

[Image]

                                CONNECTIONS

  Purpose                   Location     Purpose                Location

  SCSI connector              CN18       32-bit PCI local bus     PCI2
                                         slot

  32-bit PCI local bus        PCI1
  slot

[Image]

                                CONNECTIONS

  Purpose              Location      Purpose                  Location

  Narrow SCSI port        CN1        Port for Thermal            CN3
                                     Monitoring board

  Wide SCSI port          CN2

                           SCSI ID CONFIGURATION

   SCSI IDs           Switch         DSA Host Adapter      Non-DSA Host
                                                             Adapter

  Bay A = ID4      SW2/switch 1             On                 Off

  Bay B = ID1      SW2/switch 2            Off                 Off

  Bay C = ID2      SW2/switch 3            Off                 Off

  Bay D = ID3      SW2/switch 4             On                 Off

                       MISCELLANEOUS TECHNICAL NOTE

   The SCSI backplane board is an option and may not always be present on
                              the mainboard.

[Image]

                                CONNECTIONS

  Purpose                    Location    Purpose                Location

  Speaker                      CN1       SCSI connector          SCSIA

  Panel connector              CN2       SCSI connector          SCSIB

  manufacturer’s               CN3       Temp connector          TEMP1
  connector

  Connection to system         CN4       Temp connector          TEMP2
  board

  Fan                          FAN1      Temp connector          TEMP3

  Fan                          FAN2      Temp connector          TEMP4

  Fan                          FAN3      Test connector           TST

                  THERMAL MONITORING BOARD CONFIGURATION

  Thermal monitoring board installed                Setting

             SW3/switch 1                              On

             SW3/switch 2                              On

             SW3/switch 3                              On

             SW3/switch 4                             Off

             SW4/switch 1                              On

             SW4/switch 2                             Off

             SW4/switch 3                              On

             SW4/switch 4                             Off

             LED CONFIGURATION

         LED                Function

         LED1          Thermal monitoring

         LED2              Temperature

         LED3                  Fan

         LED4                 Power

              MISCELLANEOUS TECHNICAL NOTE

  JP1 is factory configured and should not be altered.