ADVANCED LOGIC RESEARCH, INC. FLYER SD+ Processor 80486SX/80486DX (depends on CPU card installed) Processor Speed 25/33MHz Chip Set Unidentified Max. Onboard DRAM 16MB Cache 256KB (on external cache card) BIOS Unidentified Dimensions 330mm x 218mm I/O Options Floppy drive interface, IDE interface, parallel port, PS/2 mouse port, serial ports (2), VGA port, CPU/cache slot NPU Options 4167 [Image] CONNECTIONS Purpose Location Purpose Location VGA port CN1 IDE interface CN6 PS/2 mouse port CN2 Floppy drive interface CN7 Parallel port CN3 Riser slot SL1 Serial port 1 CN4 CPU\cache slot SL2 Serial port 2 CN5 Note: The location of pin 1 is unidentified. USER CONFIGURABLE SETTINGS Function Jumper Position » On board mouse enabled JP3 Open On board mouse disabled JP3 Closed » On board VGA enabled JP6 Closed On board VGA disabled JP6 Open DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 2MB 2MB NONE NONE 4MB 2MB (2) 1M x 9 NONE 6MB 2MB (2) 1M x 9 (2) 1M x 9 10MB 2MB (2) 4M x 9 12MB 2MB (2) 1M x 9 (2) 4M x 9 16MB 2MB (2) 4M x 9 (2) 4M x 9 Note: The location of Bank 0 is unidentified. Bank 0 is factory installed and is not configurable. If 16MB is installed, Bank 0 is automatically disabled. DRAM JUMPER CONFIGURATION Size JP8 2MB - 12MB pins 1 & 3, 2 & 4 closed 16MB only pins 3 & 5, 4 & 6 closed CACHE CONFIGURATION Note: 256KB cache is located on the CPU/cache card. VRAM CONFIGURATION Size Bank 0 Bank 1 512KB (4) 256K x 16 NONE 1MB (4) 256K x 16 (4) 256K x 16 Note: Bank 0 is factory installed and is not configurable.