DTK COMPUTER, INC. PEM-3334D Processor 80386DX Processor Speed 33MHz Chip Set DTK Max. Onboard DRAM 16MB (8MB on external memory card) Cache 64KB BIOS AMI/DTK Dimensions 330mm x 218mm I/O Options 32-bit external memory card NPU Options 80387DX/3167 [Image] CONNECTIONS Purpose Location Purpose Location Reset switch J1 Speaker J4 Turbo LED J2 Power LED & keylock J5 Turbo switch J3 32-bit external memory SL1 card USER CONFIGURABLE SETTINGS Function Jumper/Switch Position » BIOS type select 27256 J6 pins 1 & 2 closed BIOS type select 27512 J6 pins 2 & 3 closed » NPU disabled J11 Closed NPU enabled J11 Open » Monitor type select SW1/4 Off monochrome Monitor type select color SW1/4 On DRAM CONFIGURATION Size Bank 0 Bank 1 1MB (4) 256K x 9 NONE 2MB (4) 256K x 9 (4) 256K x 9 4MB (4) 1M x 9 NONE 5MB (4) 1M x 9 (4) 256K x 9 8MB (4) 1M x 9 (4) 1M x 9 Note: In order to use 16MB memory, install memory card at SL1. DRAM JUMPER/SWITCH CONFIGURATION Size J9 J10 SW1/1 SW1/2 SW1/3 1MB 2 & 3 2 & 3 On On On 2MB 2 & 3 2 & 3 On On On 4MB 1 & 2 1 & 2 On Off On 5MB 2 & 3 1 & 2 Off Off On 8MB 1 & 2 1 & 2 On On Off Note: In order to use 16MB memory, install memory card at SL1. Pins designated should be in the closed position. DRAM JUMPER CONFIGURATION Memory installed in Bank 2 J8 256K x 9 pins 1 & 2 closed 1M x 9 pins 2 & 3 closed Note: Banks 2 & 3 are located on the external memory card. DRAM JUMPER CONFIGURATION Memory installed in Bank 3 J7 256K x 9 pins 1 & 2 closed 1M x 9 pins 2 & 3 closed Note: Bank 3 is located on the external memory card. CACHE CONFIGURATION Note: 64KB cache is factory installed and is not configurable. The location is unidentified.