DTK COMPUTER, INC. GRAFIKA 3B/KEEN-2531 Processor 80386SX Processor Speed 25MHz Chip Set Unidentified Max. Onboard DRAM 16MB (8MB on external memory card) Cache None BIOS DTK Dimensions 330mm x 218mm I/O Options 32-bit external memory card (PEI-307) NPU Options 80387SX/3167 [Image] CONNECTIONS Purpose Location Purpose Location Power LED & keylock J1 Turbo switch J4 Speaker J2 Reset switch J5 Turbo LED J3 32-bit system memory SL1 card USER CONFIGURABLE SETTINGS Function Jumper/Switch Position » Factory configured - do not SW1/7 Off alter » Page interleave mode enabled SW1/8 On Page mode enabled SW1/8 Off » NPU disabled W1 pins 2 & 3 closed NPU enabled W1 pins 1 & 2 closed Monitor type select W2 pins 1 & 2 monochrome closed Monitor type select color W2 pins 2 & 3 closed DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 1MB (4) 256K x 9 NONE NONE NONE 2MB (4) 256K x 9 (4) 256K x 9 NONE NONE 3MB (4) 256K x 9 (4) 256K x 9 (4) 256K x 9 NONE 4MB (A) (4) 256K x 9 (4) 256K x 9 (4) 256K x 9 (4) 256K x 9 4MB (B) (4) 1M x 9 NONE NONE NONE 5MB (4) 1M x 9 (4) 256K x 9 NONE NONE 6MB (4) 256K x 9 (4) 256K x 9 (4) 1M x 9 NONE 7MB (4) 256K x 9 (4) 256K x 9 (4) 1M x 9 (4) 256K x 9 8MB (4) 1M x 9 (4) 1M x 9 NONE NONE 9MB (4) 1M x 9 (4) 1M x 9 (4) 256K x 9 NONE 10MB (4) 1M x 9 (4) 1M x 9 (4) 256K x 9 (4) 256K x 9 12MB (4) 1M x 9 (4) 1M x 9 (4) 1M x 9 NONE 13MB (4) 1M x 9 (4) 1M x 9 (4) 1M x 9 (4) 256K x 9 16MB (4) 1M x 9 (4) 1M x 9 (4) 1M x 9 (4) 1M x 9 Note: Banks 2 & 3 are located on the external memory card. DRAM SWITCH CONFIGURATION Size SW1/1 SW1/2 SW1/3 SW1/4 Size Off On On On 1MB On Off On On 2MB Off Off Off Off 3MB Off On Off On 4MB (A) On On On Off 4MB (B) Off Off Off Off 5MB Off On Off On 6MB On Off Off On 7MB Off Off Off On 8MB On On On Off 9MB Off On On Off 10MB On Off On Off 12MB On On Off Off 13MB Off On Off Off 16MB On On On On DRAM WAIT STATE CONFIGURATION Write wait state Read wait state SW1/5 SW1/6 » 1 2 On Off » 1 3 Off On » 2 3 On On CPU SPEED CONFIGURATION Speed J4 12.5MHz pins 1 & 2 closed Controlled by keyboard pins 2 & 3 closed 25MHz Open [Image] DRAM JUMPER CONFIGURATION Size W1 W2 W3 W4 W5 W6 W7 1MB N/A N/A Open N/A N/A N/A N/A 2MB N/A N/A Open N/A N/A N/A N/A 3MB 2 & 3 N/A Closed 2 & 3 N/A 2 & 3 N/A 4MB (A) 2 & 3 2 & 3 Open 2 & 3 2 & 3 2 & 3 2 & 3 4MB (B) N/A N/A Closed N/A N/A N/A N/A 5MB N/A N/A Open N/A N/A N/A N/A 6MB 2 & 3 N/A Closed 2 & 3 N/A 2 & 3 N/A 7MB 2 & 3 2 & 3 Closed 2 & 3 2 & 3 2 & 3 2 & 3 8MB N/A N/A Open N/A N/A N/A N/A 9MB 2 & 3 N/A Closed 2 & 3 N/A 2 & 3 N/A 10MB 2 & 3 2 & 3 Closed 2 & 3 2 & 3 2 & 3 2 & 3 12MB 1 & 2 N/A Closed 1 & 2 N/A 1 & 2 N/A 13MB 1 & 2 2 & 3 Closed 1 & 2 2 & 3 1 & 2 2 & 3 16MB 1 & 2 1 & 2 Closed 1 & 2 1 & 2 1 & 2 1 & 2 Note: Pins designated should be in the closed position. Banks 0 & 1 are located on the mainboard.