PACKARD BELL 386SX-II (PCB8961) Processor 80386SX Processor Speed 16/20MHz Chip Set Unidentified Maximum Onboard Memory 5MB Cache None BIOS Phoenix Dimensions 385mm x 356mm I/O Options Floppy drive interface, game port, IDE interface, parallel port, PS/2 mouse port, serial ports (2), VGA port, riser slot NPU Options 80387SX [Image] CONNECTIONS Function Label Function Label PS/2 mouse port CN1 Floppy drive CN7 interface VGA port CN2 Serial port 1 CN8 Game port CN3 External battery JBT Parallel port CN4 IDE interface LED JHDL Serial port 2 CN5 Front panel connector JLND IDE interface CN6 Riser slot SL1 USER CONFIGURABLE SETTINGS Setting Label Position » Serial port 1 COM select COM1 JC13 Pins 1 & 2 closed Serial port 1 COM select COM3 JC13 Pins 2 & 3 closed » Serial port 2 COM select COM2 JC24 Pins 1 & 2 closed Serial port 2 COM select COM4 JC24 Pins 2 & 3 closed » Floppy drive interface enabled JFDC Pins 1 & 2 closed Floppy drive interface disabled JFDC Pins 2 & 3 closed » Game port enabled JGAMS Pins 1 & 2 closed Game port disabled JGAMS Pins 2 & 3 closed » IDE interface enabled JHDC Pins 1 & 2 closed IDE interface disabled JHDC Pins 2 & 3 closed » Parallel port LPT select LPT1 JLPS Pins 1 & 2 closed Parallel port LPT select LPT2 JLPS Pins 2 & 3 closed » Parallel port IRQ select IRQ7 JLRQ Pins 2 & 3 closed Parallel port IRQ select IRQ5 JLRQ Pins 1 & 2 closed » Factory configured - do not alter JKL N/A » Mouse IRQ select IRQ12 JMRQ Closed Mouse IRQ select none JMRQ Open » Pipeline mode enabled JPLP Closed Pipeline mode disabled JPLP Open » Monitor type select color JVD Pins 2 & 3 closed Monitor type select monochrome JVD Pins 1 & 2 closed » VGA IRQ select IRQ9 JVRQ Closed VGA IRQ select none JVRQ Open » Onboard video enabled JVGAS Pins 1 & 2 closed Onboard video enabled JVGAS Pins 2 & 3 closed DRAM Size Banks 0 & 1 Bank 2 Bank 3 1MB (8) 44256 & (4) None None 41256 2MB (8) 44256 & (4) (2) 256K x 9 (2) 256K x 9 41256 3MB (8) 44256 & (4) (2) 1M x 9 None 41256 5MB (8) 44256 & (4) (2) 1M x 9 (2) 1M x 9 41256 Note: Banks 0 & 1 are factory installed and not configurable. The orientation of the banks is unidentified. MISCELLANEOUS TECHNICAL NOTE The location of pin 1 is unidentified.