OLIVETTI M4-4X/M4-6X/PCS4XX (BA204X) Processor 80486SX/80487SX/80486DX/80486DX2 Processor Speed 25/33/50(internal)/66(internal)MHz Chip Set Unidentified Maximum Onboard 36MB Memory Cache None BIOS Unidentified Dimensions 254mm x 218mm I/O Options Floppy drive interfaces (2), IDE interface, parallel port, PS/2 mouse port, serial ports (2), VGA port, riser slot, CD-ROM connector NPU Options None [Image] CONNECTIONS Function Label Function Label PS/2 mouse port CN1 CD -ROM connector CN6 Parallel port CN2 IDE interface CN7 Serial port 2 CN3 Floppy drive interface CN8 Serial port 1 CN4 Floppy drive interface CN9 VGA port CN5 Riser slot SL1 USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not alter F1 N/A Hard drives installed 1 J2 Closed Hard drives installed 2 J2 Open » Setup access disabled J12 Pins 2 & 3 closed Setup access enabled J12 Pins 1 & 2 closed » Mouse IRQ12 enabled J13 Pins 2 & 3 closed Mouse IRQ12 disabled J13 Pins 1 & 2 closed » Serial port 1 bootstrap enabled J21 Pins 2 & 3 closed Serial port 1 bootstrap disabled J21 Pins 1 & 2 closed » Serial port 2 bootstrap enabled J25 Pins 2 & 3 closed Serial port 2 bootstrap disabled J25 Pins 1 & 2 closed » Floppy drives not write protected J33 Pins 2 & 3 closed Floppy drives write protected J33 Pins 1 & 2 closed » Factory configured - do not alter J45 N/A DRAM Size Bank 0 Bank 1 4MB 4MB None 8MB 4MB (1) 1M x 36 12MB 4MB (1) 2M x 36 20MB 4MB (1) 4M x 36 36MB 4MB (1) 8M x 36 Note: Bank 0 is factory configured and is not configurable. CPU TYPE Setting J28 J29 80486SX (PQFP) Pins 1 & 2 closed Pins 1 & 2 closed 80486SX (PQFP)/80487SX Pins 1 & 2 closed Pins 1 & 2 closed 80486SX (PQFP)/80486DX2 Pins 1 & 2 closed Pins 1 & 2 closed 80486SX (PGA) Pins 2 & 3 closed Pins 1 & 2 closed 80487SX Pins 1 & 2 closed Pins 1 & 2 closed 80486DX Pins 1 & 2 closed Pins 2 & 3 closed 80486DX2 Pins 1 & 2 closed Pins 2 & 3 closed CPU SPEED Setting J44 25MHz Closed 33MHz Open 50iMHz Closed 66iMHz Open VIDEO MEMORY Size Bank 0 Bank 1 512KB 512KB None 1MB 512KB 512KB Note: Bank 0 is factory installed and is not configurable. The chip sizes are unidentified. MISCELLANEOUS TECHNICAL NOTE The location of pin 1 is unidentified.