KLH MODEL 215 Processor 80386SX Processor Speed 16/20MHz Chip Set C & T Maximum Onboard Memory 8MB Cache None BIOS Phoenix Dimensions 330mm x 218mm I/O Options Floppy drive interface, IDE interface, parallel port, PS/2 mouse port, serial port, VGA port, riser slot NPU Options 80387SX [Image] CONNECTIONS Function Label Function Label VGA port CN1 Floppy drive interface CN5 Parallel port CN2 IDE interface CN6 Serial port CN3 Riser slot SL1 PS/2 mouse port CN4 Note: CN6 is located on the riser card. USER CONFIGURABLE SETTINGS Setting Label Position Oscillator select alternate J3 Pins 1 & 2 oscillator closed Oscillator select standard J3 Pins 2 & 3 oscillator closed Hard drive circuitry disabled JP1 Pins 1 & 2 closed Hard drive circuitry enabled JP1 Pins 2 & 3 closed » Mouse enabled SW1/3 On Mouse disabled SW1/3 Off » Serial port enabled SW1/5 On Serial port disabled SW1/5 Off » Parallel port enabled SW1/6 On Parallel port disabled SW1/6 Off » Floppy drive interface enabled SW1/7 On Floppy drive interface disabled SW1/7 Off Note: JP1 is located on the riser card. DRAM Size Bank 0 Bank 1 1MB (4) 256K x 9 None 2MB (4) 256K x 9 (4) 256K x 9 4MB (4) 1M x 9 None 5MB (4) 256K x 9 (4) 1M x 9 8MB (4) 1M x 9 (4) 1M x 9 Note: The orientation of the banks is unidentified. MONITOR Setting SW1/1 SW1/8 » Monochrome On Off Color Off On ON BOARD VIDEO Setting SW1/2 SW1/4 » Enabled On On Disabled Off Off IRQ Setting JP4 IRQ3 Pins 3 & 4 closed IRQ4 Pins 5 & 6 closed IRQ5 Pins 7 & 8 closed » IRQ9 Pins 1 & 2 closed MISCELLANEOUS TECHNICAL NOTE The location of pin 1 on all jumpers and pin 1 on SW1 is unidentified.