OLIVETTI M300-08 (BA19, BA324, BA325) M300-15 (BA320) Processor 80386SX Processor Speed 20MHz (M300-08) 25MHz (M300-15) Chip Set OPTI Video Chip Set Oak Maximum Onboard Memory 16MB Maximum Video Memory 512KB Cache None BIOS Unidentified Dimensions 330mm x 218mm I/O Options Floppy drive interface, IDE interface, parallel port, PS/2 mouse port, serial port, feature connector, VGA port, riser slot NPU Options 80387SX [Image] CONNECTIONS Purpose Location Purpose Location VGA port CN1 Floppy drive interface CN6 Serial port CN2 IDE interface CN7 Parallel port CN3 External battery CN8 PS/2 mouse port CN4 Speaker CN9 Feature connector CN5 Riser slot SL1 USER CONFIGURABLE SETTINGS Function Label Position » Built in setup carried out J1 Pins 2 & 3 closed Built in setup not carried out J1 Pins 1 & 2 closed » PS/2 mouse IRQ12 enabled J13 Pins 2 & 3 closed PS/2 mouse IRQ12 disabled J13 Pins 1 & 2 closed » Floppy drive write protect J16 Pins 2 & 3 disabled closed Floppy drive write protect J16 Pins 1 & 2 enabled closed » One hard drive installed J23 Closed Two hard drives installed J23 Open DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 2MB 2MB None None None 4MB 2MB (2) 1M x 9 None None 8MB 2MB (2) 1M x 9 (2) 1M x 9 (2) 1M x 9 10MB 2MB (2) 4M x 9 None None 14MB 2MB (2) 4M x 9 (2) 1M x 9 None 16MB (2MB) (2) 4M x 9 (2) 4M x 9 None Note: Bank 0 is factory installed and is not configurable. If 16MB is installed, the 2MB factory installed memory is disabled. VIDEO MEMORY CONFIGURATION Size Bank 0 Bank 1 256KB 256KB None 512KB 256KB (2) 256K x 4 Note: Bank 0 is factory installed and is not configurable. SERIAL PORT SELECTION Setting J6 J8 » Enabled Pins 2 & 3 closed Pins 2 & 3 closed Disabled Pins 1 & 2 closed Pins 1 & 2 closed RING INDICATOR/INPUT SIGNAL CONFIGURATION Setting J7 J9 FAIL SAFE disabled Closed Closed