IBM CORPORATION EDUQUEST 9606 (MODELS 040/04X) Processor 80486SLC Processor Speed 25/50(internal)MHz Chip Set Unidentified Video Chip Set Unidentified Maximum Onboard Memory 16MB Maximum Video Memory 512KB Cache None BIOS Unidentified Dimensions 254mm x 218mm I/O Options Floppy drive interface, IDE interface, parallel port, PS/2 mouse port, serial port, feature connector, monitor connector, riser slot NPU Options Unidentified [Image] CONNECTIONS Purpose Location Purpose Location Monitor connector CN1 Feature connector CN8 Parallel port CN2 Floppy drive power J1 connector Serial port CN4 Floppy drive power J2 connector 5.25" PS/2 mouse port CN5 IDE interface power J3 connector IDE interface CN6 Riser slot SL1 Floppy drive CN7 interface USER CONFIGURABLE SETTINGS Function Label Position » Factory configured - do not alter JP1 Open » Feature connector not used with an JP3 Open Action Media card Feature connector uses adapter JP3 Closed card and feature video connector » On board video enabled JP5 Pins 1 & 2 closed On board video disabled JP5 Pins 2 & 3 closed » Password normal operation JP7 Open Password clear JP7 Closed DRAM CONFIGURATION (MODELS 040/04X) Size Bank 0 Bank 1 Bank 2 1MB 4MB None None 3MB 4MB (2) 1M x 9 None 5MB 4MB (2) 1M x 9 (2) 1M x 9 8MB 4MB (2) 4M x 9 None 16MB 4MB (2) 4M x 9 (2) 4M x 9 Note: Bank 0 is factory installed and is not configurable. When 16MB is installed, bank 0 is disabled. VIDEO MEMORY CONFIGURATION Note: Board is installed with 512KB memory. The location is unidentified.