DECISION COMPUTER INTERNATIONAL CO., LTD.

IPCCPU

Processor                 Z80
Processor Speed           9.83MHz
Chipset                   Unidentified
Maximum Onboard Memory    32KB SRAM/32KB EPROM
BIOS                      Unidentified
Video Chipset             Unidentified
Maximum Video Memory      Unidentified
Video Types Supported     LCD display
Highest Resolution        4 x 20 (text only)
Supported
I/O Options               Serial ports (2), LCD video out, expansion bus
Dimensions                80 x 100mm

[Image]

                                CONNECTIONS

           Function             Label           Function          Label

  External battery connector     JP6      Expansion bus             P7

  5V DC power in                  P1      Reset switch              P9

  Generic serial port 2           P3      LCD video out            P10

  Generic serial port 1           P4      IC5 voltage              RV1
                                          adjustment

  Keyboard connector              P5      LCD contrast             RV2
  (IPCKEY/IPCKEYM)                        adjustment

  Note:RV1 should be adjusted so that pin 4 of IC5 is 1.3V and pin 5 is
  equal to the voltage going into P1. P3 and P4 are not RS-232 serial.
  The interface type is provided by one of the boards on the sections for
  the IPC232ST, IPC232CL, and IPC422/485 cards.

                        USER CONFIGURABLE SETTINGS

                  Setting                       Label        Position

  »   System interrupt timers enabled            JP1          Closed

      System interrupt timers disabled           JP1           Open

  »   MAX960 chip not installed in IC5           JP2          Closed

      MAX960 chip installed in IC5               JP2           Open

  »   Watchdog timer disabled                    JP3           Open

      Watchdog timer enabled                     JP3          Closed

  »   Power fail interrupt disabled              JP4           Open

      Power fail interrupt enabled               JP4          Closed

  »   Real-time clock interrupt disabled         JP5           Open

      Real-time clock interrupt enabled          JP5          Closed

  »   Keyboard enabled                           JP7         Pins 2 & 3
                                                              closed

      Keyboard disabled                          JP7         Pins 1 & 2
                                                              closed

Card Type   Serial
Chipset     Unidentified
I/O Options Serial port

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  Header to main board P3      P1      RS-232 or current loop       P3
  or P4                                serial port

  DC power in                  P2

IPCCPU (IPC422/485 SERIAL CARD)

Card Type   Serial
Chipset     Unidentified
I/O Options Serial port

[Image]

                                CONNECTIONS

          Function            Label            Function            Label

  Header to main board P3      P1      RS-422 or RS-485 serial       P3
  or P4                                port

  DC power in                  P2

                  SERIAL PORT CONFIGURATION

       Setting               JP2                  JP3

       RS-422          Pins 2 & 3 closed   Pins 2 & 3 closed

       RS-485          Pins 1 & 2 closed          Open

                         RECEIVER ENABLE SELECTION

       Setting              JP1/A            JP1/B             JP1/C

      RTS enables           Closed            Open             Open
       receiver

      DTR enables            Open             Open            Closed
       receiver

    Receiver always          Open            Closed            Open
       enabled

  Note:The receiver may not be always enabled in RS-485 mode.

             MISCELLANEOUS TECHNICAL NOTE

  No information is available on the IPC232FS card.