SHUTTLE COMPUTER INTERNATIONAL, INC.

HOT-613 (SINGLE)

Processor                   Pentium Pro
Processor Speed             180/200MHz
Chip Set                    Intel
Video Chip Set              None
Maximum Onboard Memory      512MB (EDO supported)
Maximum Video Memory        None
Cache                       256/512KB (located on Pentium Pro CPU)
BIOS                        Award
Dimensions                  305mm x 240mm
I/O Options                 32-bit PCI slots (4), floppy drive interface,
                            green PC connector, IDE interfaces (2),
                            parallel port, PS/2 mouse port, serial ports
                            (2), IR connector, USB connectors (2), ATX
                            power connector
NPU Options                 None

[Image]

                                CONNECTIONS

  Purpose                  Location    Purpose                  Location

  ATX power connector        ATX       IDE interface 2            JP13

  Floppy drive interface     CN1       IDE interface LED          JP21

  Parallel port              CN2       Green PC connector         JP22

  Serial port                CN3       Reset switch               JP24

  Serial port                CN4       Chassis fan power          JP25

  USB connector               J6       IR connector               JP29

  USB connector               J7       Remote power on            JP34
                                       connector

  Speaker                    J11       Green PC LED               JP36

  Power LED & keylock        J12       32-bit PCI slots         PC1 – PC4

  IDE interface 1            JP12      PS/2 mouse port            PS1

                        USER CONFIGURABLE SETTINGS

               Function                    Label           Position

      Flash BIOS voltage select 12v        JP15        Pins 1 & 2 closed

      Flash BIOS voltage select 5v         JP15        Pins 2 & 3 closed

  »   Factory configured - do not          JP17          Unidentified
      alter

  »   CMOS memory normal operation         JP41        Pins 2 & 3 closed

      CMOS memory clear                    JP41        Pins 1 & 2 closed

                        DRAM CONFIGURATION

         Size                 Bank 0                Bank 1

         8MB               (2) 1M x 36               None

         16MB              (2) 2M x 36               None

         16MB              (2) 1M x 36            (2) 1M x 36

         24MB              (2) 2M x 36            (2) 1M x 36

         32MB              (2) 4M x 36               None

         32MB              (2) 2M x 36            (2) 2M x 36

         40MB              (2) 4M x 36            (2) 1M x 36

         48MB              (2) 4M x 36            (2) 2M x 36

         64MB              (2) 8M x 36               None

         64MB              (2) 4M x 36            (2) 4M x 36

         80MB              (2) 8M x 36            (2) 2M x 36

         96MB              (2) 8M x 36            (2) 4M x 36

        128MB              (2) 8M x 36            (2) 8M x 36

        128MB              (2) 16M x 36              None

        160MB              (2) 16M x 36           (2) 4M x 36

        192MB              (2) 16M x 36           (2) 8M x 36

        256MB              (2) 16M x 36          (2) 16M x 36

        256MB              (2) 32M x 36              None

        320MB              (2) 32M x 36           (2) 8M x 36

        384MB              (2) 32M x 36          (2) 16M x 36

        512MB              (2) 32M x 36          (2) 32M x 36

  Note: Board accepts EDO memory. Board also accepts x 32 SIMMs.

                      CACHE CONFIGURATION

  Note: 256KB/512KB cache is located on the Pentium Pro CPU.

                            CPU SPEED SELECTION

   CPU     Clock   Multiplier    JP4     JP5     JP6      JP7     JP8   JP9
  speed    speed

  180MHz   60MHz       3x       Closed   Open   Closed   Closed   1 &   1 &
                                                                  2     2

  200MHz   66MHz       3x       Closed   Open   Closed   Closed   2 &   2 &
                                                                  3     3

  Note: Pins designated should be in the closed position.