COMPAQ COMPUTER CORPORATION PROLIANT 2000R Processor Pentium Processor Speed 66/90MHz Chip Set Unidentified Video Chip Set None Maximum Onboard Memory 512MB (EDO supported) Maximum Video Memory 1MB Cache 256/512KB BIOS Unidentified Dimensions 305mm x 244mm I/O Options Unidentified NPU Options None [Image] CONNECTIONS Purpose Location Purpose Location Proprietary slots SL1 – SL4 External memory card SL5 Note: The location and types of I/O options are unidentified. USER CONFIGURABLE SETTINGS Function Label Position » Factory configured - do not SW4/1 On alter » Soft switching mode enabled SW4/2 On Soft switching mode disabled SW4/2 Off » Keyboard broadcasting mode SW4/3 Off disabled Keyboard broadcasting mode SW4/3 On enabled » Mouse broadcasting mode SW4/4 Off disabled Mouse broadcasting mode enabled SW4/4 On » Scan mode enabled SW4/5 On Scan mode disabled SW4/5 Off » Tiering mode disabled SW4/6 Off Tiering mode enabled SW4/6 On » Factory configured - do not SW4/7 Unidentified alter » Factory configured - do not SW4/8 Unidentified alter DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 Bank 3 64MB (4) 4M x 36 None None None 128MB (4) 8M x 36 None None None 256MB (4) 16M x None None None 36 128MB (4) 4M x 36 (4) 4M x 36 None None 256MB (4) 8M x 36 (4) 8M x 36 None None 256MB (4) 4M x 36 (4) 4M x 36 (4) 4M x 36 (4) 4M x 36 512MB (4) 8M x 36 (4) 8M x 36 (4) 8M x 36 (4) 8M x 36 Note: The location of banks 0 & 1 is unidentified. Banks 2 & 3 are located on the memory card. CACHE CONFIGURATION Note: The location of the cache is unidentified. MONITOR SELECTION NOTE Note: The Proliant 2000R is capable of controlling up to 8 servers, each with their own monitor. To select a monitor type for a specific server, first consult either the 4 or 8 Port Monitor Control Selection Table to determine which switches are used for the configuration.. Then refer to the Server Monitor Selection table to determine the individual switch settings. 4 PORT MONITOR CONTROL SELECTION Switch Controlling switches Server controlled S1 S1/1 - 4 1 S1 S1/5 - 8 2 S2 S2/1 - 4 3 S2 S2/5 - 8 4 8 PORT MONITOR CONTROL SELECTION Switch Controlling switches Server controlled S1 S1/1 - 4 1 S1 S1/5 - 8 2 S2 S2/1 - 4 3 S2 S2/5 - 8 4 S3 S3/1 - 4 5 S3 S3/5 - 8 6 S4 S3/1 - 4 7 S4 S3/5 - 8 8 SERVER MONITOR SELECTION Type SW1/1 SW1/2 SW1/3 SW1/4 orSW1/5 orSW1/6 orSW1/7 orSW1/8 VGA Off Off On Off Monochrome Off Off On Off VGA Off On Off Off SVGA Off On Off Off SVGA- Compaq On On Off On 430 XVGA – Off On Off Off IBM8512 XVGA – Off On Off Off IBM8513 XVGA – On On Off Off IBM8514 XVGA – On Off Off Off IBM8515 Note: Each bank of switches must reflect the type of monitor configured on the server.