DIAMOND FLOWER, INC.

686IPK (REV. A+)

Processor                   Pentium II
Processor Speed             233/266MHz
Chip Set                    Intel
Video Chip Set              None
Maximum Onboard Memory      512MB (EDO supported)
Maximum Video Memory        None
Cache                       256/512KB (located on Pentium II CPU)
BIOS                        Award
Dimensions                  305mm x 225mm
I/O Options                 32-bit PCI slots (4), floppy drive interface,
                            green PC connector, IDE interfaces (2),
                            parallel port, PS/2 mouse port, serial ports
                            (2), IR connector, USB connector, ATX power
                            connector
NPU Options                 None

[Image]

                                CONNECTIONS

  Purpose                  Location    Purpose                  Location

  ATX power connector        ATX       IDE interface 1             J7

  Serial port 2              CN1       Power LED & keylock        J8A

  Parallel port              CN2       Speaker                    J8B

  PS/2 mouse port            CN4       Reset switch               J8C

  Serial port 1              CN5       Green PC connector         J8D

  USB connector               J1       Soft off power supply      J8E

  IR connector                J2       Green PC LED               J8F

  Chassis fan power           J4       IDE interface LED          J8G

  Floppy drive interface      J5       ATX LED                    J8H

  IDE interface 2             J6       32-bit PCI slots         PC1 – PC4

                        USER CONFIGURABLE SETTINGS

                Function                     Label          Position

  »   CMOS memory normal operation            JP1       Pins 1 & 2 closed

      CMOS memory clear                       JP1       Pins 2 & 3 closed

  »   Factory configured - do not alter       JP4             Open

  »   CPU fan failure detection               JP5             Open
      disabled

      CPU fan failure detection enabled       JP5            Closed

  »   Factory configured - do not alter       JP6       Pins 1 & 3, 2 & 4
                                                             closed

              SIMM CONFIGURATION

      Size          Bank 0          Bank 1

      8MB         (2) 1M x 36        None

      16MB        (2) 2M x 36        None

      16MB        (2) 1M x 36    (2) 1M x 36

      24MB        (2) 2M x 36    (2) 1M x 36

      32MB        (2) 4M x 36        None

      32MB        (2) 2M x 36    (2) 2M x 36

      40MB        (2) 4M x 36    (2) 1M x 36

      48MB        (2) 4M x 36    (2) 2M x 36

      64MB        (2) 8M x 36        None

      64MB        (2) 4M x 36    (2) 4M x 36

      72MB        (2) 8M x 36    (2) 1M x 36

      80MB        (2) 8M x 36    (2) 2M x 36

      96MB        (2) 8M x 36    (2) 4M x 36

     128MB        (2) 8M x 36    (2) 8M x 36

     128MB        (2) 16M x 36       None

     136MB        (2) 16M x 36   (2) 1M x 36

     144MB        (2) 16M x 36   (2) 2M x 36

     160MB        (2) 16M x 36   (2) 4M x 36

     192MB        (2) 16M x 36   (2) 8M x 36

     256MB        (2) 16M x 36   (2) 16M x 36

                        SIMM CONFIGURATION (CON’T)

          Size                    Bank 0                   Bank 1

          256MB                (2) 32M x 36                 None

          264MB                (2) 32M x 36             (2) 1M x 36

          272MB                (2) 32M x 36             (2) 2M x 36

          288MB                (2) 32M x 36             (2) 4M x 36

          320MB                (2) 32M x 36             (2) 8M x 36

          384MB                (2) 32M x 36             (2) 16M x 36

          512MB                (2) 32M x 36             (2) 32M x 36

            Note: Board accepts EDO memory. Board also accepts x 32
            SIMMs.

                     CACHE CONFIGURATION

  Note: 256KB/512KB cache is located on the Pentium II CPU.

                            CPU SPEED SELECTION

    CPU speed        Clock speed          Multiplier             JP2

      233MHz            66MHz                3.5x           5 & 6, 7 & 8

      266MHz            66MHz                 4x            1 & 2, 3 & 4,
                                                                7 & 8

      300MHz            66MHz                4.5x           3 & 4, 7 & 8

      333MHz            66MHz                 5x            1 & 2, 7 & 8

  Note: Pins designated should be in the closed position.

            CPU VOLTAGE SELECTION

        Voltage                 JP8

  VID support enabled           Open

  Note: Additional settings unidentified.