TEKNOR INDUSTRIAL COMPUTERS, INC. TEK933 Device Type Mainboard Processor Pentium Processor Speed 75/90/100/120/133/150/166/200MHz Chip Set Intel Video Chip Set Unidentified Maximum Onboard 256MB (EDO supported) Memory Maximum Video Memory 2MB Cache 256KB BIOS AMI Dimensions 339mm x 122mm I/O Options Ethernet 10Base2 connector, Ethernet 10BaseT connector, floppy drive interface, IDE interfaces (2), SCSI interface, parallel port, PS/2 mouse port, serial ports (2), flat panel connector NPU Options None [Image] CONNECTIONS Purpose Location Purpose Location External battery B1 Flat panel connector J9 Chassis fan power J1 Parallel port J10 SCSI interface J2 VGA feature connector J11 IDE interface 1 J3 Analog encoder J12 connector Floppy drive J4 PS/2 mouse port J13 interface Multi function J5 VGA port J15 connector Serial port 1 J6 Ethernet 10Base2 J16 connector Serial port 2 J7 Ethernet 10BaseT J23 connector IDE interface 2 J8 USER CONFIGURABLE SETTINGS Function Label Position BIOS boot select normal J14 Open BIOS boot select recovery mode J14 Closed » Factory configured - do not W8/pins 1 & 2 Open alter » Standard mode enabled W8/pins 3 & 4 Open VT100 mode enabled W8/pins 3 & 4 Closed » Teknor extension disabled W8/pins 5 & 6 Closed Teknor extension enabled W8/pins 5 & 6 Open » On board video enabled W8/pins 7 & 8 Open On board video disabled W8/pins 7 & 8 Closed » Non maskable interrupt on power W13 Open fail output disabled Non maskable interrupt on power W13 Closed fail output enabled » Panel shift clock normal W22 Pins 1 & 2 closed Panel shift clock inverse W22 Pins 2 & 3 closed » Watchdog timer enabled W26 Closed Watchdog timer disabled W26 Open » Internal battery disabled W27 Open Internal battery enabled W27 Closed SIMM CONFIGURATION Size Bank 0 Bank 1 2MB (2) 256K x 36 None 4MB (2) 512K x 36 None 4MB (2) 256K x 36 (2) 256K x 36 6MB (2) 512K x 36 (2) 256K x 36 8MB (2) 1M x 36 None SIMM CONFIGURATION (CON’T) Size Bank 0 Bank 1 8MB (2) 512K x 36 (2) 512K x 36 10MB (2) 1M x 36 (2) 256K x 36 12MB (2) 512K x 36 (2) 1M x 36 16MB (2) 2M x 36 None 16MB (2) 1M x 36 (2) 1M x 36 18MB (2) 2M x 36 (2) 256K x 36 20MB (2) 512K x 36 (2) 2M x 36 24MB (2) 2M x 36 (2) 1M x 36 32MB (2) 4M x 36 None 32MB (2) 2M x 36 (2) 2M x 36 34MB (2) 4M x 36 (2) 256K x 36 36MB (2) 512K x 36 (2) 4M x 36 40MB (2) 4M x 36 (2) 1M x 36 48MB (2) 2M x 36 (2) 4M x 36 64MB (2) 8M x 36 None 64MB (2) 4M x 36 (2) 4M x 36 66MB (2) 8M x 36 (2) 256K x 36 68MB (2) 512K x 36 (2) 8M x 36 72MB (2) 8M x 36 (2) 1M x 36 80MB (2) 2M x 36 (2) 8M x 36 96MB (2) 8M x 36 (2) 4M x 36 128MB (2) 8M x 36 (2) 8M x 36 128MB (2) 16M x 36 None 130MB (2) 16M x 36 (2) 256K x 36 132MB (2) 16M x 36 (2) 512K x 36 136MB (2) 16M x 36 (2) 1M x 36 144MB (2) 16M x 36 (2) 2M x 36 160MB (2) 16M x 36 (2) 4M x 36 192MB (2) 16M x 36 (2) 8M x 36 256MB (2) 16M x 36 (2) 16M x 36 Note: Board accepts EDO memory. CACHE CONFIGURATION Size Bank 0 Bank 1 256KB (4) 32K x 8 (4) 32K x 8 1MB (4) 128K x 8 (4) 128K x 8 Note: The cache is located on the underside of the card. CACHE TYPE CONFIGURATION Type W1 » Write back Pins 1 & 2 closed Write through Pins 2 & 3 closed VIDEO MEMORY CONFIGURATION Note: Board accepts 1MB/2MB of video memory. The location and chip types are unidentified. CPU SPEED SELECTION CPU Clock Multiplier W2 W3 W19 W20 W21 speed speed 75MHz 50MHz 1.5x 1 & 1 & 2 & 3 1 & 2 2 & 3 2 2 90MHz 60MHz 1.5x 1 & 1 & 1 & 2 1 & 2 1 & 2 2 2 100MHz 66MHz 1.5x 1 & 1 & 1 & 2 2 & 3 2 & 3 2 2 120MHz 60MHz 2x 1 & 2 & 1 & 2 1 & 2 1 & 2 2 3 133MHz 66MHz 2x 1 & 2 & 1 & 2 2 & 3 2 & 3 2 3 150MHz 60MHz 2.5x 2 & 2 & 1 & 2 1 & 2 1 & 2 3 3 166MHz 66MHz 2.5x 2 & 2 & 1 & 2 2 & 3 2 & 3 3 3 Note: Pins designated should be in the closed position. SERIAL PORT 2 LOOPBACK SELECTION Setting W4 W15 » Normal Open Open Loopback Closed Closed SERIAL PORT 2 SELECTION Setting W5 W6 W14 W16 W17 » RS-232 1 & 2 1 & 2 Open 1 & 2 1 & 2 RS-485/422 2 & 3 2 & 3 Closed 2 & 3 2 & 3 Note: Pins designated should be in the closed position. FLOPPY DRIVE EDOUT SELECTION Setting W24 » Left to software Open Ground to pin 17 on J4 Pins 2 & 4 closed Ground to pin 29 on J4 Pins 3 & 4 closed EDOUT to pin 29 on J4 Pins 1 & 3 closed EDOUT to pin 17 on J4 Pins 1 & 2 closed FLOPPY DRIVE HDOUT SELECTION Setting W25 » Left to software Open Ground to pin 27 on J4 Pins 2 & 4 closed Ground to pin 33 on J4 Pins 3 & 4 closed HDOUT to pin 33 on J4 Pins 1 & 3 closed HDOUT to pin 27 on J4 Pins 1 & 2 closed BASE I/O SELECTION Address W9 » 190H Pins 1 & 2, 3 & 4 closed 290H Pins 1 & 2 closed 390H Pins 3 & 4 closed 390H Open SCSI TERMINATION SELECTION Setting W18 » Controlled by hardware Pins 2 & 3 closed Controlled by software Pins 1 & 2 closed Disabled by hardware Open FEATURE/VIDEO STANDBY SELECTION Setting W7 W23 » Feature connector disabled/video Closed Open standby enabled Feature connector enabled/video Open Closed standby disabled