LANNER ELECTRONICS, INC.

AP-5200SH

Device Type         Mainboard
Processor           Pentium
Processor Speed     75/90/100/120/133/150/166/180/200MHz
Chip Set            SIS
Video Chip Set      Unidentified
Maximum Onboard     64MB (EDO supported)
Memory
Maximum Video       Unidentified
Memory
Cache               256/512KB
BIOS                Award
Dimensions          Unidentified
I/O Options         Floppy drive interface, green PC connector, IDE
                    interface, parallel port, PS/2 mouse port, serial ports
                    (2), VGA port, cache slot, IR connector
NPU Options         None

[Image]

                                CONNECTIONS

  Purpose                 Location     Purpose                 Location

  Power LED & keylock        C1        PS/2 mouse port            CN4

  IDE interface LED          C2        Serial port 1              CN5

  Turbo LED                  C3        IDE interface              CN6

  Speaker                    C4        Floppy drive               CN7
                                       interface

  Green PC connector         C5        Parallel port              CN8

  Reset switch               C6        Serial port 2              CN9

  Auxiliary keyboard         CN1       IR connector               IR1
  connector

  Power connector            CN2       Cache slot                 SL1

  VGA port                   CN3

                        USER CONFIGURABLE SETTINGS

               Function                    Label           Position

  »   Factory configured - do not           JP2             Closed
      alter

  »   Factory configured - do not           JP3        Pins 1 & 2 closed
      alter

      Power good signal detect from         JP5        Pins 2 & 3 closed
      power supply

      Power good signal detect from         JP5        Pins 1 & 2 closed
      board

  »   Factory configured - do not           JP8          Unidentified
      alter

  »   Factory configured - do not           JP9          Unidentified
      alter

  »   Factory configured - do not          JP10          Unidentified
      alter

         SIMM CONFIGURATION

       Size             Bank 0

       8MB           (2) 1M x 36

       16MB          (2) 2M x 36

       32MB          (2) 4M x 36

       64MB          (2) 8M x 36

  Note: Board accepts EDO memory.

                CACHE CONFIGURATION

           Size                      SL1

          256KB            256KB module installed

          512KB            512KB module installed

                        CACHE JUMPER CONFIGURATION

            Type                      JP6                    JP7

        Asynchronous           Pins 1 & 2 closed       Pins 1 & 3, 2 & 4
                                                            closed

       Pipeline burst          Pins 2 & 3 closed       Pins 3 & 5, 4 & 6
                                                            closed

                    VIDEO MEMORY CONFIGURATION

  Note: the size & location of the video memory is unidentified.

                            CPU SPEED SELECTION

   CPU speed      Clock speed     Multiplier         JP1          JP4

     75MHz           50MHz           1.5x           3 & 4         Open

     90MHz           60MHz           1.5x           1 & 2         Open

     100MHz          66MHz           1.5x           Open          Open

     120MHz          60MHz            2x            1 & 2        3 & 4

     133MHz          66MHz            2x            Open         3 & 4

     150MHz          60MHz           2.5x           1 & 2      1 & 2, 3 &
                                                                   4

     166MHz          66MHz           2.5x           Open       1 & 2, 3 &
                                                                   4

     180MHz          60MHz            3x            1 & 2        1 & 2

     200MHz          66MHz            3x            Open         1 & 2

  Note: Pins designated should be in the closed position.

                      WATCHDOG TIMER ACTIVE SELECTION

               Time out                                J1

                  .5 sec                        Pins 2 & 3 closed

                   1 sec                        Pins 5 & 6 closed

                   2 sec                        Pins 8 & 9 closed

  »                4 sec                       Pins 11 & 12 closed

                   8 sec                       Pins 10 & 11 closed

                  16 sec                        Pins 7 & 8 closed

                  32 sec                        Pins 4 & 5 closed

                  64 sec                        Pins 1 & 2 closed

                      WATCHDOG TIMER ACTIVE SELECTION

                Setting                                JP11

  »             Reset system                     Pins 1 & 2 closed

                 NMI system                      Pins 2 & 3 closed

                  Disabled                             Open