FLASH TECH, INC.

SL-61C

Device Type              Mainboard
Processor                Pentium II/Celeron
Processor Speed          233/266/300/333MHz
Chip Set                 Intel 440EX
Maximum Onboard Memory   256MB (EDO & SDRAM supported)
Cache                    256/512KB (located on the Pentium II CPU)
BIOS                     Award
I/O Options              32-bit PCI slots (3), floppy drive interface, IDE
                         interfaces (2), parallel port, PS/2 mouse port,
                         serial ports (2), AGP slot, USB connector, IR
                         connector, green PC connector
Dimensions               220mm x 220mm

[Image]

                                CONNECTIONS

  Purpose                  Location    Purpose                  Location

  AGP slot                   AGP       IDE interface LED          J1A

  PS/2 mouse port            CN1       IR connector               J1B

  Serial port 2              CN2       Power switch               J1C

  Serial port 1              CN3       Green PC connector         J1D

  Parallel port              CN4       Speaker                    J2A

  Floppy drive interface     CN5       Reset switch               J2B

  USB connector              CN6       Power LED & keylock        J2C

  IDE interface 1            CN7       Turbo LED                  J2D

  IDE interface 2            CN8       32-bit PCI slots         PC1 - PC3

  Chassis fan power          FAN3

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

  »   CMOS memory normal operation            JP5           Pins 1 & 2
                                                              closed

      CMOS memory clear                       JP5           Pins 2 & 3
                                                              closed

  »   Normal VGA card enabled                JPVGA            Closed

      Special VGA card enabled               JPVGA             Open

                            USB PORT SELECTION

                Function                      JP2               JP3

  »   Redirect all USB ports to USB        Pins 2 & 3        Pins 2 & 3
      connector                              closed           closed

      Redirect USB1 to AGP port            Pins 1 & 2        Pins 1 & 2
                                             closed           closed

                DRAM CONFIGURATION

      Size            Bank 0           Bank 1

       8MB         (1) 1MB x 64         None

      16MB         (1) 1MB x 64     (1) 1MB x 64

      16MB         (1) 2MB x 64         None

      24MB         (1) 2MB x 64     (1) 1MB x 64

      32MB         (1) 2MB x 64     (1) 2MB x 64

      32MB         (1) 4MB x 64         None

      40MB         (1) 4MB x 64     (1) 1MB x 64

      48MB         (1) 4MB x 64     (1) 2MB x 64

      64MB         (1) 4MB x 64     (1) 4MB x 64

      64MB         (1) 8MB x 64         None

      72MB         (1) 8MB x 64     (1) 1MB x 64

      80MB         (1) 8MB x 64     (1) 2MB x 64

      96MB         (1) 8MB x 64     (1) 4MB x 64

      128MB        (1) 8MB x 64     (1) 8MB x 64

      136MB       (1) 16MB x 64         None

      144MB       (1) 16MB x 64     (1) 1MB x 64

      160MB       (1) 16MB x 64     (1) 2MB x 64

      192MB       (1) 16MB x 64     (1) 4MB x 64

      224MB       (1) 16MB x 64     (1) 8MB x 64

      256MB       (1) 16MB x 64    (1) 16MB x 64

  Note: Board accepts both EDO and SDRAM.