HEWLETT-PACKARD COMPANY

HP VECTRA VE 5/XXX SERIES 3

Device Type          Mainboard
Processor            Pentium
Processor Speed      75/90/100/120/133/150/166/200MHz
Chip Set             SIS
Video Chip Set       None
Maximum Onboard      192MB (EDO supported)
Memory
Maximum Video Memory None
Cache                256KB
BIOS                 Unidentified
Dimensions           275mm x 205mm
I/O Options          Floppy drive interface, IDE interfaces (2), parallel
                     port, PS/2 mouse port, serial ports (2), cache slot
NPU Options          None

[Image]

                                CONNECTIONS

  Purpose                   Location   Purpose                   Location

  3.3v power                  C1       Parallel port               CN4

  Speaker                     C2       PS/2 mouse port             CN5

  Status panel connector      C3       IDE interface 1             CN6

  External battery            C4       IDE interface 2             CN7

  5v power                    C5       Floppy drive interface      CN8

  VGA port                    CN1      VGA feature connector       CN9

  Serial port 2               CN2      Cache slot                  SL1

  Serial port 1               CN3

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

      Serial EEPROM flag normal               J15             Closed
      operation

      Serial EEPROM flag clear                J15              Open

  »   Keyboard power down enabled             JP4             Closed

      Keyboard power down disabled            JP4              Open

  »   Flash BIOS enabled                     SW1/1             Off

      Flash BIOS disabled                    SW1/1              On

  »   CMOS memory normal operation           SW1/2             Off

      CMOS memory clear                      SW1/2              On

  »   Password normal operation              SW1/3             Off

      Password clear                         SW1/3              On

                      SIMM CONFIGURATION

      Size          Bank 0          Bank 1          Bank 2

      16MB        (2) 2M x 36        None            None

      32MB        (2) 2M x 36     (2) 2M x 36        None

      32MB        (2) 4M x 36        None            None

      48MB        (2) 2M x 36     (2) 2M x 36    (2) 2M x 36

      64MB        (2) 4M x 36     (2) 4M x 36        None

      64MB        (2) 8M x 36        None            None

      96MB        (2) 4M x 36     (2) 4M x 36    (2) 4M x 36

     128MB        (2) 8M x 36     (2) 8M x 36        None

     128MB       (2) 16M x 36        None            None

     144MB       (2) 16M x 36     (2) 2M x 36        None

                  SIMM CONFIGURATION (CON’T)

      Size          Bank 0          Bank 1          Bank 2

     160MB       (2) 16M x 36     (2) 2M x 36    (2) 2M x 36

     160MB       (2) 16M x 36     (2) 4M x 36        None

     192MB       (2) 16M x 36     (2) 4M x 36    (2) 4M x 36

     192MB       (2) 16M x 36     (2) 8M x 36        None

     192MB        (2) 8M x 36     (2) 8M x 36    (2) 8M x 36

            Note: Board accepts EDO memory.

                CACHE CONFIGURATION

           Size                      SL1

          256KB            256KB module installed

                        CACHE JUMPER CONFIGURATION

                   Type                                  J6

  »               Synchronous                     Pins 2 & 3 closed

                 Asynchronous                     Pins 1 & 2 closed

                            CPU SPEED SELECTION

  CPU speed      Clock      Multiplier      J7       SW2/1        SW2/2
                 speed

    75MHz        50MHz         1.5x        2 & 4      Off          Off

    90MHz        60MHz         1.5x        1 & 3      Off          Off

   100MHz        66MHz         1.5x        3 & 4      Off          Off

   120MHz        60MHz          2x         1 & 3       On          Off

   133MHz        66MHz          2x         3 & 4       On          Off

   150MHz        60MHz         2.5x        1 & 3       On          On

   166MHz        66MHz         2.5x        3 & 4       On          On

   200MHz        66MHz          3x         3 & 4      Off          On

  Note: Pins designated should be in the closed position.