MITAC INTERNATIONAL CORPORATION

6010EU/VA

Device Type              Mainboard
Processor                Pentium II/Celeron
Processor Speed          233/266/300/333MHz
Chip Set                 Intel 440EX
Video Chip Set           ATI
Maximum Onboard Memory   256MB (EDO & SDRAM supported)
Maximum Video Memory     2MB
Cache                    0/128/256/512KB (located on the CPU)
BIOS                     Unidentified
Dimensions               305mm x 244mm
I/O Options              32-bit PCI slots (3), floppy drive interface,
                         game/MIDI port, green PC connector, IDE
                         interfaces (2), parallel port, PS/2 mouse port,
                         serial port, VGA port, USB connectors (2), line
                         in, line out, microphone in, audio in – CD-ROMs
                         (2)

[Image]

                                CONNECTIONS

  Purpose                  Location    Purpose                  Location

  Audio in – CD-ROM           J1       CPU fan power              J12

  Line out                    J2       Wake on modem              J20
                                       connector

  Line in                     J3       Wake on LAN connector      J21

  Game/MIDI port              J4       Power LED                  J23

  Microphone in               J5       IDE interface 1            J24

  VGA port                    J6       Reset switch               J25

  Parallel port               J7       IDE interface LED          J26

  Serial port 1               J8       Green PC connector         J27

  USB connector 1             J9       IDE interface 2            J28

  USB connector 2            J9A       Floppy drive               J29
                                       interface

  PS/2 mouse port            J10       32-bit PCI slots         PC1 – PC3

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

  »   CMOS memory normal operation            J30           Pins 1 & 2
                                                              closed

      CMOS memory clear                       J30           Pins 2 & 3
                                                              closed

              DIMM CONFIGURATION

      Size          Bank 0          Bank 1

      8MB         (1) 1M x 64        None

      16MB        (1) 2M x 64        None

      16MB        (1) 1M x 64    (1) 1M x 64

      24MB        (1) 2M x 64    (1) 1M x 64

      32MB        (1) 4M x 64        None

      32MB        (1) 2M x 64    (1) 2M x 64

      40MB        (1) 4M x 64    (1) 1M x 64

      48MB        (1) 4M x 64    (1) 2M x 64

      64MB        (1) 8M x 64        None

      64MB        (1) 4M x 64    (1) 4M x 64

      72MB        (1) 8M x 64    (1) 1M x 64

      80MB        (1) 8M x 64    (1) 2M x 64

      96MB        (1) 8M x 64    (1) 4M x 64

     128MB        (1) 16M x 64       None

     128MB        (1) 8M x 64    (1) 8M x 64

           DIMM CONFIGURATION (CON’T)

      Size          Bank 0          Bank 1

     136MB       (1) 16M x 64     (1) 1M x 64

     144MB       (1) 16M x 64     (1) 2M x 64

     160MB       (1) 16M x 64     (1) 4M x 64

     192MB       (1) 16M x 64     (1) 8M x 64

     256MB       (1) 16M x 64    (1) 16M x 64

            Note: Board accepts SDRAM memory.

                            CACHE CONFIGURATION

            Note: 256KB/512KB cache is located on the Pentium II CPU.
            128KB cache is located on the Celeorn 300A & 333 CPU.

                        VIDEO MEMORY CONFIGURATION

  Note: 2MB of video memory is factory installed and is not configurable.

                            CPU SPEED SELECTION

    CPU speed        Clock speed          Multiplier             J14

      233MHz            66MHz                3.5x           1 & 2, 9 & 10

      266MHz            66MHz                 4x            5 & 6, 7 & 8,
                                                               9 & 10

      300MHz            66MHz                4.5x           5 & 6, 9 & 10

      333MHz            66MHz                 5x            7 & 8, 9 & 10

  Note: Pins designated should be in the closed position.